Gain visibility into long-term facility needs with FMX’s capital forecasting tools. This session will show you how to track asset lifecycles, plan for major repairs or replacements, and build funding models that support smarter decision-making over time.

**This webinar is part of our 2026 Virtual Roadshow, created for those who weren’t able to attend our National Conference in person. It’s a convenient way to access some of our most valuable content.

Access the full recording

"*" indicates required fields

This field is hidden when viewing the form

Presenters

Joshua Moore

Joshua Moore

Manager, Product Management at FMX

View profile

Lucas D. Novotny

Lucas D. Novotny

Executive Director of Housing, Dining, and Unions at the University of Nebraska–Lincoln

View profile

Transcript

Josh Moore: Alright, everybody. Good to have you all joining us to talk about capital planning through a financial lens. How do we all start to think a little more like a chief financial officer as we think about our capital plans? I’m really honored to be joined by Lucas Novotny, the executive director of housing at the University of Nebraska-Lincoln.

It’s neat that you’re actually calling in from your office this time, Lucas. Thanks for joining. I’ve really enjoyed getting to chat with Lucas, one of the most financially minded people I’ve ever had the privilege of talking with about capital planning. So I’m really excited for you all to get to learn from him.

We’d also love to hear from you as we go through this topic. Definitely take full advantage of the Q&A section.

I’ll be monitoring that Q&A section throughout the webinar, and we’d love to answer any of the questions you have.

And if any of you have best practices around any of the topics we cover, I’d love to hear from you on that as well. You can put those in the chat and share them with other folks in the webinar, because there’s a lot of good brainpower in the room.

My name is Josh Moore. I’m the manager of our product management team, and I had a strong hand in building the Capital Planner tool, with the help of Lucas and others. So, Lucas, I figured the best way for folks to get to know you a little better is if you’d share a little about what your day-to-day looks like.

Lucas Novotny: Yeah. Josh, thanks. I’m really excited to be here, everyone.

I’ll tell you, that was a very kind and probably unworthy introduction. That was very generous. But I think the reason I was probably asked to speak on this topic is that in my role at the University of Nebraska, I oversee about 3.1 million square feet of space, an $80 million budget, and 450 staff, and we do significant renewal and replacement work every year. I lead our Division of Student Life capital planning efforts across all of our properties.

And I’ve done that type of work at a few different schools. I’m not a facilities person. I think that’s important. I didn’t come up through the work. I never turned a wrench. That’s the best way to put it.

But what I have done is elevate the work of our facilities professionals, and put them in rooms where their work really shows and really matters, because making and maintaining our students’ spaces is really, really critical. At the University of Nebraska specifically, I oversee housing, dining, and the Nebraska Union.

So everywhere from where our students live, to where they eat, to where they gather and have events. I get to steward those relationships and those environments every day, and I love my work. I talk a little about loving a good umpire. A good umpire calls a good game, and you never know they’re there. I just love when our environments work, when they meet our students where they are, deliver for them, and contribute to their student success.

So that means I get to hang out with them. I get to build spaces for them. I get to think about what their needs are. That’s what I get to do. And often, I’m trying to blend financial discussions with operational requirements and needs, and that’s what our topic is today, I think. And the kitschy little thing I said at the FMX conference, which I’ll say again here: When the part of the University of Nebraska I get to lead is occupied, when we’re serving meals and our residence halls are full,

we’re the 29th-largest city in Nebraska. So I think that experience is really applicable to all the people here who are in school districts, in higher education, or in municipalities and parks and rec.

Our challenges are your challenges. Sometimes I might speak a little higher ed, but I think the concepts we’re going to talk about today are really applicable to your work. The challenges of a CFO, the challenges of your operations, how to get those things to talk together, how to put program and facility in the same room: Those transcend whether it’s a municipality or higher education. I think that’s what Joshua asked me to talk about today.

Josh Moore: Heck yeah.

Lucas Novotny: So we’ll riff on that a little bit. We’ll go back and forth. We’ll be really conversational. If there’s anything in the Q&A, like, hey,

say that again, what did you mean? Or if you just have an open question about how this applies to your exact situation, we’d be happy to dovetail and engage in that type of conversation. But that’s me.

That’s a typical day. I think that’s why I’m here. So, back to you, Josh.

Josh Moore: Yeah. I love the umpire analogy. That’s incredibly accurate.

Let’s take a moment now to get to know who we have the privilege of talking to on this webinar. I know you all were kind enough to introduce yourselves in the chat with your locations.

I’d also love to know: What does capital planning look like in your organizations? If you don’t mind letting us know, what does it look like? Are you currently using paper binders for all of your capital planning? Is anyone using a world of spreadsheets?

Maybe you have a really huge Excel file that holds all of your capital plans and has to stay up to date. Or maybe there’s that paper binder. Or maybe you’re fortunate enough to have a system you’re using. We’d love to know what everyone is using, so we know where people are coming from. Yep.

I’m seeing some spreadsheets in the chat. I suspected that would probably be the case.

Who wants to be so bold as to say their capital planning lives in their head? Because we hear that, too.

Lucas Novotny: Great point.

These individuals who have been around for a long time, who know all the… There it is.

Josh Moore: Yep. “My head.”

Lucas Novotny: All the peaks, and all of the things that live in here.

Josh Moore: There we go, Lee. Lee did it. Lee jumped in and said his capital planning lives in his head.

Lucas Novotny: Absolutely. Absolutely.

Josh Moore: Wow. Yeah. With much respect, I can only imagine having to keep all that straight. Our goal today, as Lucas said, is definitely to bridge the gap and help you think a little more like a CFO, ultimately so we can get more of our projects funded.

We can work our way through that deferred maintenance backlog a little more effectively, and share best practices: Here are some ways to approach capital planning. And Lucas doesn’t have to be the only one sharing best practices. As I mentioned, if people have found things really effective in any of these categories, please share them. But to help everyone think more like a CFO, we have to talk about what it even means to think like a CFO in the first place. I know this was a conversation you and I got to have at the beginning of this whole thing, Lucas: what that means, and how CFOs think differently than operations folks. I know we’ve got a couple of topics here. I’d love it if you could speak to this question a little.

Lucas Novotny: Yeah. I said in my intro that I’m trying to take the great work of operations and put it in the room our CFO is asking about. And I bet your experience is something like this. I’ve seen it in a whole bunch of places, so I’m just going to jump in and say: I bet your budget feels more like an allowance than a strategic opportunity for your area. Often, I hear from leaders in the facilities world who say, well, tell me what my budget is, and I’ll tell you what I’ll fix.

Yeah. That’s one way to do it. But what if: If we fix this, we could do this, and we could return that?

I could enhance services. I could change environments. I could bring in more students, or I could save on staff time, or I could do something else. Often, I hear facilities leaders I’ve had the fortune to work with say, just tell me my budget, and I’ll tell you what I’ll fix.

Because here are the five most critical things. I’ll get those done. I’ll make sure the roof doesn’t blow off and the life safety system stays together. But they don’t get the privilege, truly, of seeing the whole financial picture.

We’ll talk about that a little today, too. They don’t get the privilege of hearing that we have financial levers we can pull. We have opportunities for strategic investment, but we also have real-life constraints. Particularly in my situation, the number of students I have in housing directly dictates the amount of reinvestment I can put into my facilities.

That’s a math problem. It’s as much a math problem as anything. So if we can find ways to invest in our facilities that drive more students to them, which creates more rent, then we have more opportunities and bigger budgets to do cool things and attack that deferred maintenance backlog. That’s what I think we’re talking about when we talk about thinking like a CFO.

It’s not an allowance. It’s about where my one dollar is spent in the most proper and impactful way. We’ll talk about that again throughout our presentation, but that’s the feel and the vibe of the conversation we’re going to have today.

Back to you.

Josh Moore: Yeah. That zooming out is definitely going to be a pervasive theme. How do we tie back to the mission of the organization? Even if it’s not revenue-generating, everything we do is strategic in how it enhances the mission of our organizations. I love that. I think talking about this in three big buckets will help the conversation along.

Lucas already hinted at the first one: how we think about this in terms of return on investment, a math problem, as you put it. So we want to start there and talk about what that looks like at both a basic level and an advanced level. What are all the different elements that go into ROI?

Then we want to talk about seeing the bigger financial picture. What are the levers we can pull to take money out of one budget to enhance another? And the third one is really how we talk about all of these opportunities. How do we present them as scenarios, instead of just as a cost center?

That’s really about becoming a strategic partner, tying things back to the bigger picture and the mission of the organization. So let’s jump into the first one: calculating return on investment. I think this is probably best represented with a story about what it looks like when it’s not done well versus when it is done well. I know this was a real situation you ran into, Lucas, if you don’t mind speaking to it.

Lucas Novotny: Yeah, absolutely. I feel a little safer in this Zoom application, where people can’t throw their conference binders at me when I tell this story, because this one’s a tough one. I know we have people from school districts and higher education, people from all over. But here’s my real-life example of a poor business case. When we go into a big capital construction project, the nastiest phrase we hear is “value engineering.”

Value engineering. And everybody’s like, oh gosh. What that means is we’re trimming the project. We’re cutting all the good stuff out.

And, man, that stinks, because we didn’t estimate construction costs well, or we couldn’t contain our costs during construction, or we dug into that contingency, all of those things. So now we have to make some really, really tough decisions. I bet you, as leaders, 21 leaders here on the call, have had that discussion in your spaces.

So I had that conversation here. The reason you see a door on the screen is that we made a decision between solid-core doors and hollow-core doors. Okay? That was the decision. And my facilities staff will never let me live down the decision to move to the hollow-core door solution, because we live in a higher education setting. There are residence halls out my window, and I’m thinking about this right now: Our students are rough on things.

Often, we want to bulletproof everything. We want to make sure it can live up to 18-to-22-year-old shenanigans. And my staff spends a whole bunch of time replacing these doors every year, because inevitably, a shoulder goes through one, or somebody roughhouses and throws a hip through it, or does something just bananas, just straight-up silly. And our staff gets frustrated, because they have a short window to turn rooms over from occupant one to occupant two, often in a very compressed period of time in May. You’ve got four days to flip all of this, and now we’re doing something we wouldn’t have to be doing if we had just gone with the solid-core door.

I asked them the math problem: How much did that save out of the project?

It saved a significant number, a seven-digit number, out of the project.

There are a lot of doors in a residence hall. So that number, times the amount of debt I would have had to take on, plus the interest on that debt, et cetera, et cetera, is an amount of money, versus how much time and treasure we put into fixing these doors every year. These doors are pretty cheap, and I did the math. And I said, we could replace these doors three times before it would be a value conversation. We could replace every door three times before it would have been a financially poor decision. We’re not replacing those doors that often. How many do we replace each year?

A handful. Well, I’m sorry. I know that stinks. And this is where I get the tomatoes thrown at me. But that was a good business decision.

That decision to value-engineer that product, step it down, and pay the ongoing maintenance was actually the proper decision, from a dollars-and-cents, return-on-investment standpoint. Now, we have other scenarios where great decisions are made. Polished concrete is a good one. Or: We’re going to spend a little money up front to change all of our ballasts to LED lights. Those LED lights are going to return money operationally. So that upfront spend saves operational spend. That’s a good decision, because the math worked there.

We could have made different decisions each time. But what I’m challenging the room, the 21 people here, to do is think like the CFO.

What’s the best and most proper use of that one dollar?

Is it an upfront investment that saves you ongoing operational costs? Or is it saving on the initial investment, thus saving on debt, and paying for it over time, from a total cost of replacement standpoint?

There are plenty of scenarios where you could go either way. But I challenge you to think about that, and about the math these decisions require. Because that’s what your CFO, your leadership, your boards, your county commissioners, whatever governance structure you have, school boards… that’s what they’re thinking about: We have limited resources. Those limited resources can only go so far.

How do we spend that dollar in the best and most proper way? So those are a poor business case and a good business case I wanted to highlight and bring to the room today.

Josh Moore: I love that. You’re really hinting at the idea of cost of ownership. Even with the doors situation, the math equation is how often we’re replacing them, and how many times we’ll have to replace them before it evens out, and considering factors like how much time it takes every time we have to go out and replace those doors. It may feel like a lot of time, but when we do the math, maybe it wasn’t as much time as we thought to actually go make all those replacements, compared to how expensive the upgrade would have been. I feel like that all speaks to why really understanding the depth of cost of ownership is so important.

I know there are a lot of metrics or variables we can consider when it comes to cost of ownership, if we really want a comprehensive picture: things like how much we’ve been spending on it historically, or the time it takes to go out and fix it. And I know you helped put together this list, Lucas. Which of these would you want to call out specifically and speak to?

Lucas Novotny: Yeah. I’ve alluded to some of these bullets already. But I often hear my facilities leaders say things like: They don’t build them like they used to.

Again, there’s the bulletproof four-pipe or two-pipe HVAC unit that can stand up to the apocalypse, versus the in-room heat pumps I’m moving to now. They’re just different things.

Josh Moore: Yeah.

Lucas Novotny: So now I’m having to replace that heat pump on a schedule, where I never had to replace that four-pipe unit. Some of those are original from the sixties, and they’re still hanging on.

Those are your historical and anticipated maintenance costs. How long does this thing last? We need to put those into our analysis. Sometimes architects, construction engineers, and planners love to do new things.

They love to do fancy things, like this new cost-saving effort or this new sustainable thing. And I’m very pro-sustainability, but that sustainable thing might have a renewal cycle that’s more significant than something else’s. That’s part of the math. Sustainability considerations also include utility waste. Is this more efficient? At previous institutions, we made some decisions about operable versus non-operable windows, because we were recovering utilities and redistributing them throughout the building. Those are some total cost considerations to measure.

I really want to elevate asset criticality here, because there are some things you just must spend money on. I want everyone to hear that. There are some things that can’t go down, depending on your situation. I’m in a higher ed space, and my colleagues across the aisle in academic affairs talk about research. At a previous institution, we had some big, significant utility outages, and protecting yearlong and decades-long research is really critical.

Those are things we also have to manage. And sometimes they don’t have straight dollars attached. They don’t have an amount, but they do have pros and cons, and they need to be baked into this equation we’re thinking about. We need to communicate that sometimes we have to make the poorer investment because it’s part of our mission, or part of the critical life safety structure we have to provide.

This is a great slide to think about, because these are the things you can lever on, that you can pivot on, to make your points to your leadership and make your investment cases strong. Those are the couple I would elevate, Josh. I hope that’s what you wanted there.

Josh Moore: That was phenomenal. This is also a good time for a reminder that we’d love to hear from all of you. We just gave a list of things to consider when it comes to the cost of ownership and the returns, and the non-negotiables, as you mentioned with asset criticality.

But we may have missed some. If you think of anything else, please drop it in the chat. We want to hear from you, and the people on this webinar want to hear from you, so we can share these ideas. Similarly, if anything Lucas is talking about sparks a question, or as I start to talk about how we can track some of this in FMX, if you have questions you want us to answer here in the webinar, please put them in the Q&A section. We really do want to hear from you, and we’ll take some time to answer those.

With that, if we have that list of considerations, how do we start tracking them? There are lots of ways to answer that question.

Because this is an FMX webinar, I want to talk a little about how we can track this inside of FMX. FMX is only one system, though. There are lots of ways to do this, and the principles apply regardless of what you use.

But I do want to talk about some tools at your disposal if you’re an FMX customer. The first is that our Capital Planner tool tracks the average annual maintenance cost compared to the replacement asset value. If FMX is your work order system, all of the cost to maintain the asset, including labor costs, inventory costs, and the cost of getting a contractor out to service it, is already tracked in your system.

FMX can take all of that data and tell you: Here’s how much you’re spending on each of these assets every year, or here’s how much you spent in the last 12 months. That really gives you a ballpark of what you’re spending on it each year, and we compare that to what it would cost to just flat-out replace it. So in this first example, this air handler unit, we’re spending $1,000 a year on it.

This particular one would cost $12,000 to replace, and then we give you a little percentage here: MC over RAV, which is maintenance cost over replacement asset value, if you’re not familiar.

This becomes a really helpful metric to prioritize, and to demonstrate to higher-up leadership: Hey, this is how much this is costing us. If we’re thinking more strategically, we can use this to get a payback period. For example, if our MC over RAV was 10%, then we know that in 10 years’ time, we’ve completely paid off the cost of that asset.

All of these are data points we can consider.

But for some of the non-measurable items, things that don’t have a number, like asset criticality, there are ways to track those in the system, too, and bring them into the equation. We have the ability to create custom fields in FMX. If you’ve spent time in FMX, you’re already familiar with that concept. We can get really creative with these custom fields, and we could create one that tracks, on each asset, how critical it is to our operations.

So if you want to go through and create standards, like, hey, this item is critical because it’s safety and compliance-related, and this one is critical because it’s operations or revenue-related, you can do that. You can see a tooltip section there, too. You can add some special instructions, or maybe make it a read-only custom field.

Tammy, to answer your question about where you can find this tab in FMX: If you’re talking about the Capital Planner tab, it’ll show up as a Capital Planner module if you’ve purchased that feature.

You may have to have the permission added to your user type if it hasn’t been given to you.

For these custom fields, if your question is about this one, that’s in the admin settings. You can go into the form builder to create these custom fields. You do have to be an FMX admin to set up a custom field. I imagine we have a lot of FMX admins in the room. If not, it’s easy enough to partner with your FMX admin to build out some of this functionality.

Glad that answered your question, Tammy. So we can do things like this. We can track that criticality. And finally, I want to talk about utilities.

I know that wasn’t something we talked about when we were looking at the considerations to measure, but it is a factor here. If we want to look at the utility cost impact, especially as utility costs continue to rise, it’s really important that we understand the benchmark, especially if we’re doing a project like LED lights, which was your example of a really good ROI investment, Lucas. Let’s set some benchmarks. Let’s understand what we’re spending.

Let’s focus on our underperforming buildings, so we can start getting some of that return on investment and kill two birds with one stone.

Very cool. I don’t know if there’s anything you want to add, Lucas. If not, we’ll keep rolling.

Lucas Novotny: No. Your utilities example about LED lights is this exact graph. I can flatten it, climb it, lower it, and save money on different sides of the equation.

Those are good things. We want low replacement value items, because we want to make and maintain our spaces, and we also want them to be operationally efficient and save us money on an operational level year over year. When we can do that, those are good things, and these are good levers to pull. So I can sign off on that slide.

Josh Moore: Fantastic. And, Danny, to answer your question: Yes, this video will be sent out. I’m also more than happy to send the slides out. I’ll get with Cassie, and we can send those out to you all.

Cool. With that, we’ll keep rolling. If you have more questions about things we’ve already talked about, or things we will talk about… I’ll keep repeating this over and over: Please put them in the Q&A. We’d love to talk about them. Let’s switch gears now to budgeting levers. This is zooming out to see the full financial picture.

Lucas, if I were to replace my roof, what are some things I should consider? What are some things I could consider?

Lucas Novotny: Well, we’ve talked a little about some of those efficiency scores, but I bet you didn’t think about the cost of eggs.

Josh Moore: Did not.

I did not consider the cost of eggs here.

Lucas Novotny: Or a chicken strip. Let me tell this story in a punchy, kitschy way. If you were in my space, in my organization, you’d hear me say something along the lines of: My requirement is to make one dollar over the amount of money I’m required to make. One dollar over my bills. I make one dollar over what I have to pay in debt, and then I put it all back into the student experience.

And how I do that is by pulling different budget levers, which is what we’re talking about. Yes, there’s an upfront cost, where you see these maintenance individuals making a choice about the roof: what it costs, what type of material it is, what the efficiency score is. I don’t know a lot about R-value, but we can probably talk about that at some point.

We can do all of those things.

But have you ever been in a place where you’ve considered making some operational decisions differently to be able to afford a roof, or a nicer roof that might be a better investment? The story I told at the conference, and the story I’ll tell you, is that I had to make a decision about what egg and what chicken strip we purchased. By making a consistent chicken strip purchase, and by changing from fresh-cracked eggs to a premade egg mix, I saved money annually, and it created some efficiencies and economies of scale in my operational budget, which brought more money down to the bottom line, which allowed me to reinvest differently, strategically.

Often, my maintenance individuals don’t see that calculus going on in our spaces. Those are the things I’d challenge you all on, to be really, really informed facilities leaders or capital planners: Think about how you might advocate for, or be part of the solution of, these different types of budget levers we can pull. The joke is, I don’t often think about the price of eggs when I pay for roofs. But I could. Because I could think about other operational cost savings across my organization that allow me a different level of reinvestment.

Because, bullet three here: It all rolls up.

With these budget hierarchies, it doesn’t matter if it’s over here in the maintenance budget or over here in the dining budget. It all rolls up to my desk, and I’m responsible for the stewardship of these resources at this university. And I’m required to make one dollar over my debt payment. So to the facilities individuals in the room, and I know I make some of my facilities people panic, I’m like: I’m going to blow your budget.

That’s okay. Because the dining guy over here has done some nice things, or maybe we didn’t hire some staff. There are some budget savings. Those things come into play. This is also a great time to talk about how we might set budgets in general.

There are often times when we have positive variance. I require all my staff to budget on a per-month basis, because in the event the first quarter happens and you don’t have any reason to use that money, or your expenditures are low, great. I’m banking that one. I’m putting that down, because my facilities individual might come back to me and say, hey,

X, Y, Z is happening. We had a bad storm. We had some vandalism, whatever’s going on. And I’m like, great.

I’ve got some money for you, because we were great budget managers and baked some positive variance into our budgets. A lot of times, facilities individuals hide some money in those utilities lines, because, tell us how to budget utilities better. Nobody can. So we sometimes hide it in there.

But that’s where your Utility Manager in FMX can track that for you and say: Look, we’re trending better than we anticipated. Hey, leader. Hey, board.

Hey, whoever: We have some more money to reinvest in our facilities. And now you’re thinking like a CFO. Now you’re thinking about those annual budget cycles and all of those things.

Just two bullets here at the very end. I talked about one dollar over what I’m required to make. That’s what they call my debt coverage ratio: the amount of money for my mortgage payment, for all the debt I own, plus a reinvestment percentage, and I have to make one dollar over that.

Or maybe you’re a department that’s required to have a certain year-end contribution amount. I’ve run organizations like that, where I’m supposed to make $10 million, or $5 million, or $1 million, or $100,000, or $2. Whatever that year-end budget target is, we’re managing to that number.

Again, all of this rolls up. My advice, if you’re here in this meeting, is to challenge yourself to think about how all of these budget pieces work together, and to be able to be articulate about that, and not just have visual line of sight into your renewal and replacement budget, or your capital planning piece. It’s much greater than that. And I think people like me, and even my leadership, want to be able to have those conversations about our operational performance that allows for strategic reinvestment in our places, in our facilities. When you’re able to speak that language, you’re already a leg up on the competition. That’s how you get your projects championed in rooms they weren’t championed in before, and how you prepare your leaders to do so for you if you’re not in that room. That’s the point of this slide, I think, Josh.

Josh Moore: Yeah. I love that. And I’m excited to talk about that revenue concept, because even for the public sector, where thinking about it as revenue may not be the right approach, all of us have facilities, and we can often rent out those facilities to reimburse some of these budgets. We can look at those as opportunities to fill a different bucket that we can use to better serve our students, or our communities, or whoever our organization serves.

Before we jump into that topic, though, Lucas: You mentioned having some margin in the utilities budget, which is phenomenal. One of the things we talked about that I really enjoyed, and would love to talk about here as well, is how you set up project budgets based on estimates, with the same kind of margins at different phases of the project, and how that pays dividends as the project goes along.

Lucas Novotny: Yeah, thanks for that reminder. Often, we have construction contingencies and owner contingencies in these large projects, and I’m hopeful you do, too. I’m hopeful that’s standard practice in your large-scale capital construction projects.

You can negotiate what that percentage is, depending on your environment, and your political environment, and what’s appropriate. But we talked about that value engineering decision on a previous slide, where we had to take something out of the project.

If we’re appropriately managing our projects throughout their different phases, and attending to those costs and cost-containment measures, I’d love for us to think about ways we might put something back into the project. Let me tell you a quick story. We controlled costs on a project at another institution, and at the end of the day, I was able to make a significant investment in a renewable energy system that wasn’t originally scoped.

Often, we’re trying to run these projects so lean, because we’re worried, rightfully so, about getting them through political environments and board approvals. But knowing where your contingencies exist, and being maniacal in some ways about cost tracking, and you can use tools like FMX to help you do this, allows you to think: If the opportunity presented itself, here’s the enhancement we can make. Value enhancement, not value engineering, for our projects.

I think that’s the story you wanted me to tell, Josh.

Josh Moore: That’s exactly the one. I’m glad you got to share it.

With that, I want to switch gears back into FMX, just to show you how this can look in the real world.

The first example I’m going to show is how we can track things like budgets inside of FMX. Again, there are other systems that can do the same thing, but maybe FMX is your domain. We have the ability to put budgets in here, operating budgets, as much as you have visibility into, so you can roll it up as high as possible and understand how this fits into the larger picture.

What I’m showing right here is our Financial Planner product, where you can put in these budgets or set up an integration to pull them in automatically.

And then all of the costs that get accrued throughout FMX, through all of your maintenance, all of your projects, and asset replacements, get tracked here, so you know how you’re doing and where the money is. Similarly, you can set up budgets in here for revenue coming in. If you do facility rentals, you can track a budget here and understand the money coming in from renting out those spaces. This also lets you break budgets down into sub-budgets. So if you have a large umbrella budget for capital projects, you can break it into individual project budgets, and maybe break those down even further: Here’s how much we want to spend in phase one of the project, so we can start to do some of that value-add you just talked about, Lucas.

Just to show how this looks, and to be pedantic here, this is how it looks as you’re tracking all those transactions. In this example, it’s just a general cost budget, as you can see across the top. Now I can open it up and see all of those transactions. In this case, I’m tracking my gym rentals as reimbursement back into that budget, so I can see a credit being given back to it.

So, really helpful.

Yeah. Did you have something you wanted to mention?

Lucas Novotny: I think Matt’s question here in the chat is also really prudent at this point. I’ll let Josh talk about the integration possibilities, but your point is well heard, Matt: If you’re doing some of this work in different systems and different tools, of course we don’t want to have to do this work twice.

Josh Moore: Yeah.

Lucas Novotny: But if you’re already thinking about some of these levers and opportunities, then you’re thinking in this cost-containment and cost-control way.

Josh Moore: Yeah.

Lucas Novotny: Again, I’ll let Josh speak to the integration opportunities.

Josh Moore: Yeah.

Lucas Novotny: But what I would add here is what I’m pushing my staff to do: Put as much as possible into this at the operational level, from a work ticket standpoint. Often, at least, I hear about big system failures, and I don’t hear about small-ticket items. Those small-ticket items need to get rolled up here, too, because they’re drains on budgets and drains on reinvestment that we can address at different times.

That’s just how I’d answer Matt’s question. Because I struggle, too, with living in a couple of different systems that don’t always talk to each other and provide me different things. Getting that single pane of glass is really helpful. So, Josh, do you want to talk about that?

Josh Moore: Yeah. Thanks for catching that comment, so I didn’t just keep rolling and could actually address it. I’ve seen folks set up two types of integrations with FMX’s accounting area. That accounting table is generated automatically.

All of these transactions are auto-created based on activity that’s already happening in FMX. So for that part, there’s no double entry. But I can see the point about not wanting to double-enter all of these budgets and then track them in two places. The two integrations I’ve seen: The first is from people who want to do all of their budget strategy elsewhere, maybe in Oracle or Workday or some other financial system or ERP. They’ve set up integrations to take this transaction list and push it to those systems.

The nice part about that is the transactions can get auto-categorized to different account codes, so it takes that preliminary step and automates it. We don’t have to go in and tag what belongs to which accounts. We push that out, and all the budget strategy happens in those systems. Other folks don’t have a window into those systems. The financial team does, but the operations leader does not.

So they create a carbon copy inside of FMX through the integration. No manual effort required. We’re just going to pull all of those budget codes directly into FMX. They’ll get retired here as they get retired in the other system.

So it’s a real-time, up-to-date list of budgets, and those same transactions get categorized here. Maybe it’s a combination of the two integrations I just mentioned: We push them there, but we also categorize them here. All of this can be done automatically, without having to manually go through and classify all these transactions and manage all these budgets, because, yeah, I would never want to do that in two places.

That would be a nightmare.

Hopefully that’s helpful in answering your question, Matt.

The next thing I want to show is coming down to the ground a little more, to the story you shared at the very end, Lucas, which was all about projects. We have the ability to track bids and estimates on projects, compare them to our budgets, and break them down. We have this estimated cost area, which is different from the budget category. As you can see in this window, we have our budget for building construction phase one, and now we actually have our estimate. And we can break it down as granularly as we want. As we get specific estimates for all the different pieces of a construction project, we can manage that here.

Maybe we have a construction vendor doing all this work, and we’re just taking the high-level details, so we have a copy of it and can compare it against our budgets. But this type of breakdown can exist, so you can look for ways to reinvest in the later stages of the project, maybe to splurge on some nicer furniture because we’ve left enough room in the budget.

Cool.

Keep the questions coming if you’ve got any others on budgets or estimating. If not, we’ll cover our last major bucket, which is all about how we present these scenarios once we’ve got all this information at our disposal. I know there was a story about Larry and the heat pumps you wanted to talk about here, Lucas, so I’ll kick it to you.

Lucas Novotny: Yeah, that’s my heat pump story. The magical heat pump that keeps coming up here.

For me as a leader, this was fantastically informative.

I had come into an institution with some legacy processes, where the right people weren’t in the right rooms to make the right decisions. What I mean by that is we were taking that approach of: Tell me what my budget is, and I’ll tell you what I’m going to fix and how. And then we’d argue over this zero-sum pie of what’s going on.

It wasn’t until we had a clear vision of what we were trying to do, which was make a significant reinvestment in our housing environments, whether a new build or a significant renovation, that we were attempting at the University of Nebraska…

We knew that was the pin out there in the future. This is what we’re headed toward. We had some clarity on that vision, and we were trying to align ourselves around that objective.

And when we did that, we ended up bringing a lot of different people into the room. When I was telling Josh this story as we were preparing, it was the first time finance and facilities had ever been in the same room together. And Larry, God love him, would tell me, we have to replace all these heat pumps in these buildings, and I’m going to have to take the building offline. I’m going to have to take the whole thing down for a whole summer, and it’s just going to have to be what it’s going to be.

And I said, I don’t know if we can actually stomach that revenue loss. We have summer operations. We have summer programs. And he said, well, I don’t see any other way.

And I said, well, what if that building was going to go offline in three years?

What if we weren’t going to keep it into the future, because we’re going to do something different? Oh, I can do that. I can do that right now. I can limp those along for the next three to five years.

Okay. So why was it needed yesterday? It was the critical, number one thing. We were risking life safety and blah, blah, blah. And now that we had some clarity of vision, it was, oh, I can limp that along.

So this is my call to you. If you’re Larry in this scenario, fine. How do you get into the room to talk about it at a bigger, higher level? And how do you cascade what we’re trying to do down to the individuals in the Larry world?

And if you’re me in this scenario, how do you bring the right people around the table to talk about vision and what you’re trying to do? Because when you do, you make far more financially prudent and true decisions than when we’re back in our corners. This is the silly “everything lives in a silo” thing.

Josh Moore: Yeah.

Lucas Novotny: You hear that often. But this is a real-life example of it. We make different decisions. We do better when we know better. When we know more and have more information, we make more proper and better reinvestment decisions.

So depending on who you are in this scenario, my challenge is to make sure you bring the right people around the table, and have the great data to support you, to make these decisions for your context, whatever that is.

That’s the story of the heat pump. I hope that next time you’re thinking about your capital planning, you think about Larry. Think about whether the right people, program and facilities and finance, are all in the same room. Are we making that decision together?

Are we in the boat together? Are we rowing in the same direction? Are we making this thing together? Here, I think, Josh, you’re going to talk about this slide? Or am I going to talk about this slide?

I forgot.

Josh Moore: I’d love it if you’d be up for speaking to these, because I think these came directly out of your brain. There are ways to pull different levers here.

Lucas Novotny: Yeah, thanks. I couldn’t remember. This is great. And I know it feels a little like I’m barking to the choir here.

I know we’re at 18 people in this room, and you’re probably doing this. So I’m not saying you’re not doing this already, because you probably are. But with good, proper data and good, proper tools, we can talk to ourselves about the cost of doing this now, or delaying it. What are we risking? And the next part: If the budget’s cut, what does the critical systems plan look like?

I’ll tell you a story. I think this is the one you want me to tell. It’s about one little obsolete elevator pin at another institution. Every time I got a phone call about this one residence hall, I was like, oh gosh, is it the elevator pin?

Because if it’s the elevator pin, we have to unoccupy that building, and I’m going to be up the creek without a paddle very quickly. Those are the decisions, and the risk tolerance, we sometimes get to work with. When we make some of these decisions really real… I’m telling you a story about an elevator pin, and you’ll remember it. It meant that if that pin broke, because that elevator was obsolete, I couldn’t occupy the building. I wouldn’t meet code, and I’d have 100 or 200 residents I’d have to relocate.

Or I could just say: Well, you know what? We’re facing some critical failures in this residence hall. Sure.

But if you say to your CFO, if this elevator pin goes, this is what’s going to happen, that’s just a different story. Sometimes facilities individuals have to tell good stories. And finance people have to tell good stories. I think that’s a really good story to be able to tell, and it’s backed by data and by planning.

So there’s the “what if” here, and you could also think about it differently when you’re telling stories:

If you could give me this, or if I did this, I could achieve that.

I’ve also been in the position of modeling what would happen to our housing strategy if we lost 10% of our rooms, or 10% of our students. Building those plans with those baked-in contingencies and levers shows thoughtfulness, instead of just: It must be done. It’s a critical path item. It’s a critical failure.

Those are great. But sometimes CFOs go sort of numb and nose-blind to those things when they hear them all the time, because every system can’t be critical all the time. You have to be able to make some decisions and take some risks.

For you as leaders, being articulate about those things, and about what we’re actually working with, makes those stories real for CFOs and decision-makers and boards and principals or commissioners, or whomever you work for. We all have bosses. And then you’re able to pull on those levers. You’re able to tell those stories. You’re able to do “if this, then that.”

Josh Moore: Yeah.

Lucas Novotny: And that scenario planning is really helpful.

Not to give a plug for FMX, but FMX can help you do that.

That’s why I’m sitting here on this webinar with them.

Josh Moore: Yeah. I love that, and I love that you tied it to storytelling, because that’s really what it comes down to. You can have all the data in the world, all the knowledge in the world, and the best tools in the world, but if you can’t communicate it well, nobody’s going to listen, or they’re not going to understand. We have to get the story across, making it real, like with the elevator pin. When you think about what a story needs to be effective, it needs four things. It needs a clear goal.

It needs a clear obstacle. What is the mission of our organization, and how is this thing we’re facing right now at odds with fulfilling that purpose? How does it impact residents’ lives, in the case of the elevators? How does it impact the lives of our students, in the case of our school buildings, or the citizens in our cities? And the other two things it needs are clear stakes: a clear positive outcome and a clear negative outcome.

If we do this and get it right, we fix this issue, and we’ll have this success, this return, this positive outcome. And if we don’t, this is the risk. This is the potential consequence we take on by not completing it. Every story has these four elements. If we adopt them in our language and use the data we’ve already collected, we’ll be much more effective at getting our projects approved and getting buy-in on what we’re trying to do.

So, yeah, Lucas mentioned this can be done in FMX. FMX is just the tool, though, which is why getting the language right and how we communicate it is so important. That way we can stop letting these board meetings be the worst part of our week, as we feel the nerves of coming to these folks and talking to them.

One tool at your disposal, though, is the ability to run scenarios inside of Capital Planner. Inside Capital Planner, by default, it’s going to show reality: our current plan, our current situation. But we can model any number of scenarios to see different futures.

We can look at how things will change if we retire a school building earlier than we thought, or if a levy passes, or if we continue to defer things, and see how that will snowball into the future.

Whenever you’re in Capital Planner, you can go in and create a new scenario. Now you’re basically in a hypothetical, where every change you make from here on out only affects that scenario. We can really explore it, move things around, save it, and easily refer back to it, so when we go have these conversations, we can pull it up and say, let’s talk about what that looks like, and see how the numbers shake out. That’s really helpful, versus having to create multiple copies of a spreadsheet, change some numbers around, and then keep them all straight.

No, we can do it all in one system, and the scenarios even continue to update when other data changes. As costs go up, Capital Planner looks at all of the current costs we’ve been tracking related to these capital projects. So if we’ve already been spending on certain projects and those costs start to go up, all of our scenarios update automatically, based on the things we can no longer control.

Anything that’s out of our control gets updated across everything that has yet to happen, which we can model out in these scenarios.

So hopefully these are some helpful tools, and hopefully you’ve gotten some helpful tidbits out of this webinar. I know it’s been a lot of fun to chat with you, Lucas, and hear what this looks like.

I know you had some words you wanted to share to send everybody off with some encouragement, so I’ll turn it over to you.

Lucas Novotny: Yeah. They asked me for a couple of closing thoughts, so I want to end my presentation here.

Thank you. I think gratitude is really important. Thanks for spending the 56 minutes with us thinking about this. If you’re here thinking about these things, I’m sure you’re very well prepared, and I hope this was the spur, or the positive push, to think about how you’re doing this.

When you think like a CFO, I want you to think about a couple of things. It stops being about a cost center and starts becoming a confidence center. I think that’s a really interesting thing to think about.

When you’re giving leadership confidence in the numbers, and you can speak to them, and you have that data, and it makes sense with the timing, it provides a level of assurance, where they’re like, oh, this is right.

And I love this idea: Your job, our job, my job is to keep my boss’s boss off my boss’s back.

And I’m able to do that when I have great numbers, great stories, great “if this, then thats,” and great plans and scenarios. Then I’m invited to tables I wasn’t invited to before. Often, I hear facilities leaders say, well, I’m just not in the room. I’m not at the right table.

So if you find yourself not at that table, start to think about what they want. I hope this presentation framed a little for you what I believe they want. Then get yourself on that side of the table. Put yourself in their minds and in their shoes, to keep your boss’s boss off your boss’s back. Give them that information, help them build those scenarios, help them tell the “if this, then that.”

Or: If we do this, we could gain this. Or: If that happens… All of those stories Josh was talking about, which I delivered to help illustrate this idea. I think that’s the summary of our conversation today: This is really important work.

You’re good. You’re able to do this. FMX can help you do it, and you’ll be at tables, and your projects will get through and supported at different levels. That’s why we wanted to talk about this with you today.

Josh Moore: Love that. Such good words. Thanks, everybody, for making the time. Hopefully you got something out of it. Lucas, thanks for taking the time. We’ll talk to you all later.